Installation instructions Installation steps ① Choose a flat wall To determine the smoothness of the wall: a few mirrors are attached to the wall, and if the image is naturally not deformed, the surface is flat. ② Use a dry rag to clean the wall surface. The wall surface of the powder layer should not be pasted with dry brown surface dust to better play the sponge adhesive. The wall is not clean, or the powder layer on the wall is easy to cause the lens to fall off the courtyard. ③Wipe the back of the lens with a dry rag, and then apply the glue. After applying the sponge glue to the back of the lens, press it back and forth repeatedly to discharge the air between the sponge and the lens. (Do not rush to tear off the paper on the glue) Note: 12in × 12in (including 12in × 12in) above size must be used with sponge glue and nail-free glue ④The fine thread hangs the weight as a reference, draws the vertical line with the ruler, and marks the height of the top of the mirror. ⑤Vertically to the horizontal line just drawn. Then draw a vertical line. To ensure that the mirror attached to the wall is not tilted, it is recommended to draw one more. ⑥Put 5~9 pieces of sponge glue and nail-free glue on the back of each mirror, stick it on the wall, and press it for about 3 minutes. What is nail-free glue? Nail-free glue is a strong glass glue, similar to the glue on the glass at home, but the setting time is fast.
Go to product page https://www.amazon.in/glass-full-length-frameless-dressing-mirror-for-bathroom-bed-kga8z at Amazon and buy the product.
Subscribe to Amazon prime https://amazon.in/prime to Skip Delivery Charges for 1 Year for Prime Products Along with Free Amazon Prime Videos